PROCEEDINGS OF THE VNIIG (VOLUME 319)
30 марта 2026
The collection presents the materials of the 17th Science and Technology Conference Hydropower. Hydraulic Engineering. New Developments and Technologies, which took place from October 8 to October 10, 2025, in Saint Petersburg at JSC «Vedeneev VNIIG» and Peter the Great St. Petersburg Polytechnic University.
The issues of studying and assessing permafrost mass, as well as methods for managing their condition, are analyzed. A technology for waterproofing cable passages in the dam crest structure using modern materials is proposed. The issue of assessing the physical and mechanical properties of concrete in operational structures using non-destructive testing methods is analyzed. Damming and derivation schemes for micro and small hydropower plants based on shell structures are proposed to reduce environmental impact and to lower the costs. Various scenarios of aging for concrete dams and their underground structures are examined. The factors contributing to the deterioration of concrete in hydraulic structures are analyzed. The results of physical modeling of a vertical vortex spillway with an adjustable throttle opening are presented. The selection of the optimal design of flip buckets was studied using a physical model. Options for the development of the tailing dams storage facility are justified, taking into account the improvement of the reliability of the hydraulic facilities (HF). A review of digital technologies for monitoring the operation of cooling towers at thermal and nuclear power plants (TPP and NPP) has been carried out.
The collection is intended for specialists in engineering geology and hydrogeology, soil mechanics, hydraulics, hydraulic engineering, and ecology, as well as for students, graduate students, and instructors of the relevant disciplines.
CONTENT
| Nazukina Yu.E. Permafrost change estimation methods and permafrost soil mass state control modes in hydraulic structures location areas. A range of problems and directions of development | 3 |
| Muratov A.A., Zagriadsky I.I. Improvement of the technology of waterproofing cable penetrations in the dam crest structure using modern materials and methods | 12 |
| Shtengel V.G. Specifics of assessing the physico-mechanical properties of concrete in operated structures using non-destructive testing methods | 22 |
| Kasharin D.V., Godin M.A. Application of composite shell structures for the construction of micro and small hydroelectric power plants in small water courses | 44 |
|
Krutov D.A. Assessment of the relaibility of aging concrete dams
|
58 |
| Okhapkin G.V., Deyneko (Vasilevskaya) L.S., Zagriadsky I.I. Concrete deterioration factors in hydraulic structures | 72 |
| Buchnev I.D. Hydraulic characteristics of the outlet tunnel of a vertical vortex spillway | 82 |
| Anisimov S.A. The influence of the design of ski jets on the parameters of local washouts | 90 |
| Kudryashova M.S., Solsky S.V., Veretelnik I.P., Kuzmina V.R., Vasiliev M.Yu. Оptions for the development of hydraulic structures of the tailings industry of the apatite-nepheline ore mining | 102 |
| Kislitsyna V.A. Application of digital monitoring technologies for cooling tower operation control at thermal and nuclear power plants | 115 |
PERMAFROST CHANGE ESTIMATION METHODS AND PERMAFROST SOIL MASS STATE CONTROL MODES IN HYDRAULIC STRUCTURES LOCATION AREAS. A RANGE OF PROBLEMS AND DIRECTIONS OF DEVELOPMENT
Yuliya E. Nazukina
JSC «Vedeneev VNIIG», Saint Peterburg, Russia
Abstract. The purpose of the work is to analyze the existing problems of permafrost soil mass researches, their condition estimation methods and forecast changes during construction and operation of hydraulic structures and solutions to the problems. The condition estimation methods of cryolithozone localed hydraulic structures and their foundations, along with the main control modes for soils used in frozen or thawed/thawing conditions were analyzed. Based on the results of the analysis, the author drew conclusions about the need for improvement the existing standard and methodological framework in terms of designing integrated cryomonitoring systems, as well as the need to develop codes and rules for performing thermotechnical calculations.
Keywords: geotechnical monitoring, permafrost soil mass, hydraulic structure, cryolithozone, forecast, «hydraulic structure−foundation» system, thermal analysis
For citation: Nazukina Yu.E. Permafrost change estimation methods and permafrost soil mass state control modes in hydraulic structures location areas. A range of problems and directions of development. Proceedings of the VNIIG. 2026;319:3-11. (In Russ.).
IMPROVEMENT OF THE TECHNOLOGY OF WATERPROOFING CABLE PENETRATIONS IN THE DAM CREST STRUCTURE USING MODERN MATERIALS AND METHODS
Anton A. Muratov1, Ivan I. Zagriadsky 2
1PJSC «RusHydro» − «Zeya HPP», Zeya, Russia
2JSC «Vedeneev VNIIG», Saint Petersburg, Russia
Abstract. The article discusses the problems of waterproofing cable penetrations in the reinforced concrete cable tray of the Zeya Hydroelectric Power Plant dam crest. The analysis of the dam's design features, operating conditions, and the nature of leaks is conducted. A waterproofing technology is developed using a material from the railway industry: the two-component polyurethane mastic «VibroKron 250». The proposed technology includes the creation of a special cable penetration design with a groove and a metal sleeve that provides the possibility of vibration during mastic filling. The developed technical solution and the difficulties of carrying out repair work highlighted in this article will be useful to take into account when determining the feasibility of expensive capital interventions at other hydropower facilities with similar design features and when designing new hydropower facilities and considering the maintainability of such structures.
Keywords: waterproofing, cable penetrations, dam crest, Zeya HPP, reinforced concrete channels, polyurethane mastic, vibrational treatment, leakproofness, inter-block joints, leaks, technical solution, economic efficiency
For citation: Muratov A.A., Zagriadsky I.I. Improvement of the technology of waterproofing cable penetrations in the dam crest structure using modern materials and methods. Proceedings of the VNIIG. 2026; 319:12-21.
SPECIFICS OF ASSESSING THE PHYSICO-MECHANICAL PROPERTIES OF CONCRETE IN OPERATED STRUCTURES USING NON-DESTRUCTIVE TESTING METHODS
Vyacheslav G. Shtengel
JSC «Vedeneev VNIIG», Saint Petersburg, Russia
Abstract. The article is devoted to the problem of determining the physical and mechanical characteristics of concrete of large-sized monolithic and prefabricated reinforced concrete structures under field conditions of operated structures using classical methods of non-destructive testing. The real difficulty of obtaining correct information during the most frequently used instrumental operations is shown. It is recommended to revise the existing regulatory documentation and develop methods and modern equipment taking into account the real conditions of concrete research of existing structures.
Keywords: non-destructive testing, physical and mechanical characteristics, concrete, operated structure
For citation: Shtengel V.G. Specifics of assessing the physico-mechanical properties of concrete in operated structures using non-destructive testing methods. Proceedings of the VNIIG. 2026;319:22-43. (In Russ.).
APPLICATION OF COMPOSITE SHELL STRUCTURES FOR THE CONSTRUCTION OF MICRO AND SMALL HYDROELECTRIC POWER PLANTS IN SMALL WATER COURSES
Denis V. Kasharin1, Mikhail A. Godin2
1YURSPU (NPI), Novocherkassk, Russia
2AMAZIN LLC, Novopavlovsk, Russia
Abstract. The article is devoted to the application of shell structures made of composite materials for the creation of micro and small hydroelectric power plants (HPPs), which allow to increase the use of the hydro potential of small rivers. The authors propose dam and diversion schemes based on shell structures, which can reduce the negative impact on ecosystems and reduce capital costs.
The results of numerical modeling and experimental studies of sleeve and diversion microHPPs are presented. Different types of turbines are considered and methods of multi-criteria design optimization are proposed.
Keywords: shell structures, composite materials, micro-hydropower plants, small hydropower,hydro-potential, ecosystem, multi-criteria optimization, sleeve structures, confuser, derivation micro-hydropower plants, capital costs for energy supply
For citation: Kasharin D.V., Godin M.A. Application of shell constructions made of composite materials for the creation of micro- and small hydroelectric power plants in conditions of small water courses. Proceedings of the VNIIG. 2026;319:44-57. (In Russ.).
ASSESSMENT OF THE RELAIBILITY OF AGING CONCRETE DAMS
Denis A. Krutov
ООО «Tyvagiprozem», Tyva, Russia
Abstract. The various scenarios for the aging of concrete dams and rock foundations were considered. It is proposed to evaluate the aging of concrete based on the changes of the coefficient of thermal expansion of frozen concrete (CTE). It has been established that the CTE is one of the indicators of concrete quality. The CTE was calculated under various methods and using the data of the Bratsk dam. On top of this, the issue of comparing national and international standards was resolved in order to establish the most stringent approaches regulating the stability of concrete dams. To address this issue, stability calculations of the Son La gravity dam (Vietnam) were performed. Standards of various countries were compared by introducing a parameter that represents the ratio of the assumed safety factor to the safety factor.
Keywords: ageing scenarios, thermal expansion coefficient, stringency of standards
For citation: Krutov D.A. Assessment of the relaibility of aging concrete dams. Proceedings of the VNIIG. 2026;319:58-71. (In Russ.).
HYDRAULIC CHARACTERISTICS OF THE OUTLET TUNNEL OF A VERTICAL VORTEX SPILLWAY
Ivan D. Buchnev
JSC «Vedeneev VNIIG», Saint Petersburg, Russia
Abstract. This article presents the results of a physical model study of a vertical vortex spillway with the installation of an adjustable throttle orifice (ATO) in the form of gates partially blocking the outlet section of the throttle.
It was determined the influence of the outlet tunnel's geometric parameters on shaft filling, piezometric pressures, and energy dissipation in the annular jump.
It was concluded that the use of a ATO requires a complex control system for its flat gates, which must be fully coordinated with the inflow flow rates.
Keywords: spillway structure, vortex shaft, physical modeling, mathematical modeling
For citation: Buchnev I.D. Hydraulic characteristics of the outlet tunnel of a vertical vortex spillway. Proceedings of the VNIIG. 2026;319:82-89. (In Russ.).
THE INFLUENCE OF THE DESIGN OF SKI JETS ON THE PARAMETERS OF LOCAL WASHOUTS
Sergey A. Anisimov
JSC «Vedeneev VNIIG», Saint Petersburg, Russia,
Abstract. This article discusses the selection of the optimal design of ski jets by conducting research on a physical model. These studies examine two designs of ski jets. Each of these options has its own design features that allow you to influence the flow parameters. In these studies, physical models were used to study such parameters as the jet throw distance, specific flow rate, water depth in the washout pit, and the depth of the washout itself. Based on the results, a comparison was made of the data on the ejected jet, which were obtained theoretically and experimentally. Using graphical interpretation of the washout results, the most effective type of design was selected.
Keywords: local bottom erosion, spillway structure, ski jets, flow parameters, jet stream, physical model
For citation: Anisimov S.A. The influence of the design of ski jets on the parameters of local washouts. Proceedings of the VNIIG. 2026;319:90-101. (In Russ.).
OPTIONS FOR THE DEVELOPMENT OF HYDRAULIC STRUCTURES OF THE TAILINGS INDUSTRY OF THE APATITE-NEPHELINE ORE MINING
Maria S. Kudryashova1, Stanislav V. Solsky2, Ivan P.Veretelnik3, Valeria R. Kuzmina4, Mikhail Yu. Vasiliev5
1,4,5NPK Proektvodstroy LLC, Saint Petersburg, Russia
2JSC «Vedeneev VNIIG», Saint Petersburg, Russia,
3NPC Akron Engineering LLC, Saint Petersburg, Russia
Abstract. This article is devoted to the issue of the development of operated tailings dumps after reaching the design building marks. The article presents the results of the justification, substantiates and suggests options for further development of the existing tailings storage, taking into account the increased reliability of the GTS, as well as emerging problems with further expansion and operation of the tailings facilities. Conclusions are drawn about the appropriateness and effectiveness of each considered development option.
Keywords: apatite-nepheline ores, tailing storage, filtration strength, the surface of depression, slope stability
For citation: Kudryashova M.S., Solsky S.V., Veretelnik I.P., Kuzmina V.R., Vasiliev M.Yu. Оptions for the development of hydraulic structures of the tailings industry of the apatite-nepheline ore mining. Proceedings of the VNIIG. 2026;319:102-114. (In Russ.).
APPLICATION OF DIGITAL MONITORING TECHNOLOGIES FOR COOLING TOWER OPERATION CONTROL AT THERMAL AND NUCLEAR POWER PLANTS
Veronika A. Kislitsyna
JSC «Vedeneev VNIIG», Saint Petersburg, Russia
Abstract. The article is devoted to the application of digital monitoring technologies (sensors, SCADA systems and digital twins) to improve the efficiency and reliability of cooling towers at thermal and nuclear power plants. The advantages of digitalization compared to traditional control methods are considered, examples of implementation in domestic and foreign practice are presented, and the main challenges and prospects for introducing such technologies are analyzed.
Keywords: cooling towers, digital technologies, monitoring, sensors, SCADA systems, digital twins, thermal power plants, nuclear power plants, energy efficiency, automation
For citation: Kislitsyna V.A. Application of digital monitoring technologies for cooling tower operation control at thermal and nuclear power plants. Proceedings of the VNIIG. 2026;319:115-123. (In Russ.).